 |
Page Navigator |
|
1. Overview 2. Reservoir Removal 3. Belt & Hose Removal 4. Hose & Pump Removal 5. Reservoir Location 6. EVAP Removal 7. Shelf Install 8. New Hoses 9. Pump Install 10. Plumbing 11. Washer Pump Relocation 12. Radiator Overflow
More Projects
- Knowledge - Maintenance - About
|
Featured Links |
| PSC Steering 4x4ROCKSHOP |
 |
 Projects PSC Power Steering Pump |
| Page 9 - Pump Install | March, 2004 | |
 |
 |
|
| Install the new PSC pump. | Connect the high pressure and return lines. | |
|
Time to install the new pump. Use the spacers provided and the original bolts. Mount inside the bracket that held the factory pump.
Install the high pressure line into the steering box and into the fitting on the back of the PSC pump. Run the 3/8" return line from the steering box back to the new reservoir shelf we installed. Leave a bit of excess at that end. Position the sleeves to protect the line from the heat of the high pressure hose or any other point where it needs a bit of protection. |
||
| << Page 8 - New Hoses << | >> Page 10 - Plumbing >> | |
| All content Copyright © NakedJeep. Jeep is a registered trademark of DaimlerChrysler. |
||
 |
||