 |
Page Navigator |
|
1. Overview 2. Reservoir Removal 3. Belt & Hose Removal 4. Hose & Pump Removal 5. Reservoir Location 6. EVAP Removal 7. Shelf Install 8. New Hoses 9. Pump Install 10. Plumbing 11. Washer Pump Relocation 12. Radiator Overflow
More Projects
- Knowledge - Maintenance - About
|
Featured Links |
| PSC Steering 4x4ROCKSHOP |
 |
 Projects PSC Power Steering Pump |
| Page 7 - Shelf Install | March, 2004 | |
 |
 |
|
| EVAP bracket moved forward. | Marking holes for reservoir bracket. | |
|
I completely removed the EVAP canister bracket to drill the two new holes. I had to straighten the leg where the 3rd mounting bolt is to move the bracket forward. I marked the holes from the bottom of the fender. I decided not to redrill the fender as it is reinforced where it screws into place.
Lining up the radius of both of the PSC reservoir brackets - the one on the master cylinder and the small one that clamps the actual reservoir - I marked where I would drill mounting holes that position the cylinder as far back as possible. |
||
| << Page 6 - EVAP Removal << | >> Page 8 - New Hoses >> | |
| All content Copyright © NakedJeep. Jeep is a registered trademark of DaimlerChrysler. |
||
 |
||