 |
 Projects Hand Throttle |
| Page 6 - Connected | March, 2003 | |
 |
 |
|
| Throttle return spring and desired clip. | The cables clamped in place. | |
|
The final step is attaching the cable to the throttle body. Since I don't have cruise control, there is an open connection that can use. All I need is that plastic connecter that snaps in place. I bought a throttle return spring from the Jeep dealer and removed the clip from the spring.
I ran the cable through the clip and wound it back around itself a couple of times. I tried to use a small zip tie to hold the cable to itself, but it wouldn't tighten completely. I ended up wrapping a couple of brass staples around the two cables and pinching them tight with pliers. |
||
| << Back << | ||
| All content Copyright © NakedJeep. Jeep is a registered trademark of DaimlerChrysler. |
||
 |
||