 |
 Projects Hiding the EVAP Canister |
| Page 5 - Make It Fit | July, 2007 | |
 |
 |
|
| The canister hits the wall. | I cut the wall and bent it. | |
|
While I was testing how the canister fit I found that it did not drop down as far enough to put the shelf back on. The firewall flares forward at the bottom and the canister stopped at that point.
I crawled under the jeep and used a hack saw to make a slice in that flared part of the firewall and then bent in back to allow the canister to drop down just far enough. |
||
| << Page 4 - Trim Fittings << | >> Page 6 - Viola! >> | |
| All content Copyright © NakedJeep. Jeep is a registered trademark of DaimlerChrysler. |
||
 |
||