 |
Page Navigator |
|
1. - The Seals 2. - Brakes 3. - Rotor 4. - Hub Off 5. - The Seals 6. - Seal In
More Projects
- Destinations
|
Featured Links |
|
Alloy USA Northridge 4x4 |
 |
 Projects Axle Tube Seals |
| Page 6 - Seals In | March, 2007 | |
 |
 |
|
| Press firming and completely into the axle. | Prep the axle with a coat of grease. | |
|
I thought about using RTV but I couldn't quite talk myself into it. The seals fit tightly into the axle tube and, in my humble opinion, aren't likly to spin.
I spread a bit of grease all over the axle to keep it from rusting. And, I placed a little extra where it will spin inside the new seals. Then I put everything back together and used a grease gun to fill the new seals when I was done. Lastly, I filled and closed the brake fluid reservoir. |
||
| << Page 5 - The Seals << | ||
 Jeep is a registered trademark of DaimlerChrysler. |
||