 |
Page Navigator |
|
1. - The Seals 2. - Brakes 3. - Rotor 4. - Hub Off 5. - The Seals 6. - Seal In
More Projects
- Destinations
|
Featured Links |
|
Alloy USA Northridge 4x4 |
 |
 Projects Axle Tube Seals |
| Page 3 - Rotor | March, 2007 | |
 |
 |
|
| Remove the brake rotor. | Note position of the dust shield. | |
|
The brake rotor comes right off of the hub at this point. I wil carefully set it aside until I'm ready to reinstall it later.
Next, I'm going to unbolt the hub unit and remove the hub unit and axle as one piece. The dust shield will come loose. I will make note of how it lines up so I get it back in the right place. |
||
| <<< Page 2 - Brakes << | >> Page 3 - Hub Off >> | |
 Jeep is a registered trademark of DaimlerChrysler. |
||